“PS-02” tattoo power supply is a multi-functional precision detection power supply. It can be switched between Coil mode and Motor mode, It micro-controls the voltage level by using buttons. The front page “Power Unit PS-II” will pop up after it is plugged into a general microphone jack. After 3 seconds, the screen will jump to main page with showing the working voltage of the previous time. “PS - II” will be turned off automatically after 5 seconds without working.    

 Functions:

1.    Voltage test, Current test, Duty cycle test, Speed frequency test;

2.    “PS-II” can be switched between Coil and Rotary tattoo machine mode;

3.    “PS-II” will automatically save 4 working voltages and keeps the last one as the storage standard;

4.    “PS-II” tattoo power supply has self protective device. If use improperly, it will automatically cut off the power with the display light on;

5.    “PS-II” has current overload protection function for Coil mode. When current loads up to 99%, after 1 min it will cut off the power by itself with the display light on. Please do NOT use rotary machine under Coil Mode. You will have to get back to main menu to switch it to rotary Mode;

6.    “PS-II” power supply can control the foot switch momentary or continue.

Upper Key:

1,Make screen brighter by long-press when it is at main menu

2, Increase voltage by 0.1 when it is at operation status

Middle Key:

Switch between operating page and main menu

Left Key:

1, Choose mode between Coil and Rotary machine

2, Show operating log for the past 4 operating voltages M1, M2, M3, M4

Right Key:

Pedal switch and lock

Down Key:

1, Make screen darker by long-press when it is at main menu

2, Decrease voltage by 0.1 when it is at operation status